Whether special-shaped sheet metal processing can meet the needs of processing

    Special-shaped sheet metal processing must determine whether it can meet the needs of processing, which greatly saves the division time and cost. Suzhou chassis processing is the key technology that sheet metal technicians need to master, and it is also an important process for forming sheet metal products. It includes traditional cutting and blanking, punching, bending and forming methods and process parameters, as well as various cold stamping die structures and process parameters, various equipment working principles and operating methods, as well as new stamping technologies and new Craft.

    Check whether the special-shaped sheet metal processing inspection equipment (shèbèi) meets the normal working standards, whether the machine tool voltage is stable (wěn dìng), the socket of the machine tool must be a triangle socket, and the line requires a ground wire (also known as a lightning conductor). Idling test run, at any time, it is not allowed to touch it by hand during the operation of the machine tool (guò chéng), and it is also not allowed to use gauze to grind the running parts. You must use certain equipment to perform the grinding operation. Does it meet the normal working standards? Whether the voltage of the machine tool is stable (wěn dìng), the socket of the machine tool must be a triangle socket and the line requires a ground wire (other name: lightning protection line). Before starting, run the machine for idling test operation. Only start the machine if there is no abnormality.

    Special-shaped sheet metal processing is based on the produced alloy, specifications, and problems in the past production and quality (Emerson), and is targeted to take necessary measures to ensure that the casting process (guò chéng) is smooth and the product quality is qualified. Sheet metal processing in Suzhou is called sheet metal processing. For example, the use of sheet metal to make chimneys, iron drums, fuel tanks, oil tanks, ventilation ducts, elbows, rounded places, funnel shapes, etc. The main processes are cutting, bending buckles, bending forming, welding, riveting, etc. Certain geometric knowledge. Suzhou sheet metal has the characteristics of light weight, high strength, electrical conductivity (can be used for electromagnetic shielding), low cost, and good mass production performance. It has been widely used in electronics, telecommunications, automotive industry, medical equipment and other fields, such as Sheet metal is an essential component in computer cases, mobiles phoness, and MP3s. The requirements for labor are higher, and profits are higher. And stamping can reach about 30%, and laser split sheet metal can reach about 50%. Although sheet metal processing currently accounts for only about 25% of metal processing, but with the progress of the market (shì chǎng), I believe that the market occupied by sheet metal processing (shì chǎng) The share will grow larger.

Sheet metal processing